Table 50 Error Codes — Part Code 6005 (continued)
Part
Error
Code
Number
6005
58715
6005
6801 1
6005
68012
6005
68020
6005
68022
6005
68023
6005
68027
248 Remote Web Console for Storage System Messages and Error Codes
Error Message
The licensed capacity of XP
Continuous Access
Asynchronous or TrueCopy
Asynchronous for Mainframe
on the MCU is insufficient.
Check the licensed capacity
of this program product and
the related program products.
The related program products
are:
XP Continuous Access or
TrueCopy for Mainframe
XP Continuous Access
Asynchronous or
TrueCopy Asynchronous
for Mainframe
The operation failed because
the specified M-VOL was
used as an XP Thin
Provisioning volume.
The operation failed because
the specified R-VOL was used
as an XP Thin Provisioning
volume.
Maximum Initial Copy
Activities (CU) cannot be
changed to Enable or
Disable, because there are
pairs in COPY or Pending
status.
The specified M-VOL is used
as a data volume of XP
Continuous Access Journal or
Universal Replicator for
Mainframe. The operation
failed because Disaster
Recovery Extended function
is not installed in the MCU.
The specified R-VOL is used
as a data volume of XP
Continuous Access Journal or
Universal Replicator for
Mainframe. The operation
failed because Disaster
Recovery Extended function
is not installed in the RCU.
The operation failed because
the RCU does not support the
CU number, the LDKC
number or the LU number of
the specified M-VOL.
Recommended Action
Check the licensed capacity
of this program product and
the related program products.
See the user's guides of XP
Continuous Access or
TrueCopy for Mainframe for
details on the licensed
capacities.
The related program products
are:
XP Continuous Access or
TrueCopy for Mainframe
XP Continuous Access
Asynchronous or
TrueCopy Asynchronous
for Mainframe
Check whether the specified
R-VOL is an XP Thin
Provisioning volume.
Check whether the specified
R-VOL is an XP Thin
Provisioning volume.
Confirm that no pairs are in
COPY or Pending status, and
then retry the operation.
Install Disaster Recovery
Extended function to the
MCU.
Install Disaster Recovery
Extended function to the RCU.
Check the CU number, the
LDKC number or the LU
number of the specified
M-VOL.
Severity
Failure
Level
Level
W
5
W
0
W
0
W
0
W
0
W
0
W
0