HP XP20000/XP24000 Manual page 183

Table 40 Error Codes — Part Code 4005 (continued)
Part Error Error Message
Code Number
4005 55540 The specified function is not
available because it requires
Cache Residency Manager.
4005 55541 The specified function is not
available because it requires
Cache Residency Manager
for Mainframe.
4005 55542 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
4005 55576 An LDEV number that does
not apply to the selected CU
group has been specified.
4005 56526 The resources of other SLPR(s)
cannot be accessed.
4005 56542 The prestaging is not
executed because the
prestaging area does not
exist. Check the Cache
Residency setting.
4005 5851 1 The current Cache Residency
setting cannot be changed
because the sidefile size
exceeds the threshold.
4005 58512 The current Cache Residency
setting cannot be changed
because the prestaging
operation is in progress.
Please wait for a while, and
then retry the operation.
4005 58513 Prestaging not completed.
Recommended Action
Install the required program
product. When an SLPR is
allocated, install a necessary
program product for the
SLPR.
Install the required program
product.
If this problem persists, call
HP technical support.
Check the setting.
Correct the settings, and then
retry the operation.
Set the prestaging area by
using Cache Residency to use
the prestaging function.
Wait a few seconds, and
then retry the operation.
Wait a few seconds, and
then retry the operation.
Wait a few seconds, refresh
the window, and then retry
the configuration operation.
Or check the status of the
disk storage system to find
whether the storage system is
blocked or not. If the problem
persists, call HP technical
support.
Remote Web Console Error Codes 183
Severity Failure
Level Level
E 6
E 6
E 2
E 3
E 6
W 6
E 6
W 6
E 6