HP XP20000/XP24000 Manual page 288

Table 54 Error Codes — Part Code 6505 (continued)
Part Error
Code Number
6505 58329
6505 58333
6505 58334
6505 58335
6505 58336
6505 58337
6505 58338
6505 58340
6505 58341
288 Remote Web Console for Storage System Messages and Error Codes
Error Message
The Add Pair (Paircreate)
operation or the Resume Pair
(Pairresync) operation cannot
be performed because the
journal cache for the master
journal group is not empty
and contains data.
The parameter related to the
inflow cannot be changed
because the specified journal
group is not a master journal
group.
Because the status of the
specified journal group is
neither Initial nor Stop, the
parameter related to the
inflow cannot be changed.
Because the specified journal
group is not in Initial status,
the timer type cannot be
changed.
The specified volume cannot
be registered as a journal
volume because the CLPR
number of the specified
volume is different from the
CLPR number of the journal
volume that has already been
registered.
The Add Pair (Paircreate)
operation failed because the
CLPR number of the specified
primary data volume was
different from the CLPR
number of the journal volume
in the specified master
journal group.
The Add Pair (Paircreate)
operation failed because the
CLPR number of the specified
secondary data volume was
different from the CLPR
number of the journal volume
in the specified restore
journal group.
The specified volume cannot
be used as a journal volume
because the specified volume
is a LUSE volume.
The specified volume cannot
be used as a journal volume
because the specified volume
is an external volume.
Recommended Action
Call HP technical support.
Check the attribute of the
specified journal group.
Check the status of the
specified journal group.
Check the status of the
specified journal group.
Check the CLPR number of
the registered journal volume,
and specify the volume that
has the same CLPR number.
Check the CLPR number of
the journal volume in the
specified master journal
group, and specify the
primary data volume that has
the same CLPR number.
Check the CLPR number of
the journal volume in the
specified restore journal
group, and specify the
secondary data volume that
has the same CLPR number.
Check the specified volume
and specify a non-LUSE
volume.
Check the specified volume
and specify a non-external
volume.
Severity Failure
Level Level
W 0
W 5
i 0
W 0
W 0
W 0
W 0
W 0
W 0