HP XP20000/XP24000 Manual page 8

Table 1 Error Codes — Part Code 0001 (continued)
Part Error
Code Number
0001 401 1
0001 4012
0001 4013
0001 4020
0001 5013
0001 5014
0001 5075
0001 5099
0001 5132
0001 5300
0001 5301
8 Remote Web Console for Storage System Messages and Error Codes
Error Message
A network error occurred.
The probable cause is:
A timeout error occurred
during communication
with the SVP.
The number of clients logged
on to the RMI server has
exceeded 32.
The server configuration is
invalid. Call HP technical
support.
Network error detected;
exclusive lock is released.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
The user ID or password is
invalid.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
The specified user ID is
already logged on, or the
previous logon was not
properly terminated.
Try again later. (By default,
the session/RMI time-out is
one minute.)
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
Recommended Action
Log on again.
A network error may occur
when the load of another
application program working
on the same computer with
Remote Web Console is high.
Increase the value of the RMI
timeout period when network
error occurs.
Log on again after a while.
Failed to access the Config
file. Call HP technical
support.
Lock is removed. Lock again.
If the same problem persists
despite retrying, call HP
technical support.
Enter correct user ID or
password.
If this problem persists, call
HP technical support.
If the same problem persists
despite retrying, call HP
technical support.
Log on with a different user
ID. There is a possibility that
the termination process in the
previous logon was invalid.
(Terminated by clicking the
end button of the browser.)
After RMI Time-out (default 1
min.), log on again.
If this problem persists, call
HP technical support.
If the same problem persists
despite retrying, call HP
technical support.
Severity Failure
Level Level
E 1
E 2
E 2
E 2
E 2
W 0
W 2
E 2
E 1
E 2
E 2