HP XP20000/XP24000 Manual page 274

Table 54 Error Codes — Part Code 6505 (continued)
Part Error
Code Number
6505 8835
6505 8887
6505 8888
6505 8889
6505 8890
6505 8891
6505 8893
6505 8894
6505 8895
6505 8896
6505 8897
6505 8898
6505 8899
6505 8900
6505 8901
6505 8902
6505 8903
6505 8915
274 Remote Web Console for Storage System Messages and Error Codes
Error Message
The Add Pair (Paircreate)
operation failed because you
tried to create volume pairs
which exceeded the licensed
capacity of the secondary
subsystem.
An internal error occurred.
An internal error occurred.
The specified port is not
equipped.
The specified port is being
initialized.
Logical paths exist on the
port.
An internal error occurred.
Jobs exist on the port.
Jobs exist on the port on the
remote subsystem.
Parameter error has occurred.
LUs exist on the port.
Pending data exists on the
port.
An internal error occurred.
An error occurred during the
port change.
An error occurred during the
port change.
An error occurred during the
port change.
Unknown Error Code.
Remote Web Console
attempted to change the port
type. However, this attempt
was rejected because the
same operation was in
progress from a host.
Recommended Action
See the license key at the
secondary storage system
and check the licensed
capacity of volumes. To
create more pairs, purchase
a license key for larger
capacity.
Check the SSB log, and then
call HP technical support.
Check the SSB log, and then
call HP technical support.
Refresh the window, and
retry the operation. If nothing
changes, call HP technical
support.
Wait until the initialization of
the port ends, and retry the
operation.
Delete the logical paths on
the port and retry the
operation.
Check the SSB log, and then
call HP technical support.
Stop the jobs from the host
and retry the operation.
Stop the jobs from the host
and retry the operation.
Refresh the window, and
retry. If nothing changes, call
HP technical support.
Delete the LUs defined on the
port, and retry the operation.
Retry the operation.
Check the SSB log, and then
call HP technical support.
Call HP technical support.
Call HP technical support.
Call HP technical support.
Call HP technical support.
Check the status of the port,
and retry the operation.
Severity Failure
Level Level
W 0
E 4
E 4
E 4
E 4
E 4
E 4
E 4
E 4
E 4
E 4
i 4
E 4
E 4
E 4
E 4
E 4
W 0