HP XP20000/XP24000 Manual page 55

Table 1 1 Error Codes — Part Code 0190 (continued)
Part Error Error Message
Code Number
0190 5007 Enter the location name.
0190 5008 You cannot use the following
characters: " \ , ; : * ? < >
| /
0190 5009 You cannot use multi-byte
characters.
0190 5010 This page can be accessed
by the administrator only.
0190 501 1 The same nickname is
already registered.
0190 5012 Enter the nickname with up
to 16 alphanumeric
characters.
0190 5013 Enter the product name with
up to 16 alphanumeric
characters.
0190 5014 Enter the location name with
up to 16 alphanumeric
characters.
0190 5015 Enter the serial no. with a
number fewer than 65536.
0190 5016 Enter the hostname with up
to 255 alphanumeric
characters.
0190 5017 Enter the hostname.
0190 5018 Only the following characters
can be used: a-z A-Z 0-9.
0190 5019 You cannot use multi-byte
characters.
0190 5020 Select [Host Name] to enter
hostname.
0190 5021 Select [IP Address] to enter IP
Address.
0190 5041 The same serial number is
already registered.
0190 5061 The IP address is already
registered.
0190 5071 The same hostname is
already registered.
0190 5100 The files is compressing now.
0190 51 10 Failed to compress the trace
files.
Recommended Action
Input the location name and
retry.
Remove the invalid characters
and retry.
Remove the multi-byte
characters and retry.
None.
Specify a different nickname
and register again.
Specify the nickname using
up to 16 characters or less
and retry.
Specify the product name
using up to 16 characters or
less and retry.
Specify the location name
using up to 16 characters or
less and retry.
Specify the serial number
with a number 65535 and or
and retry.
Enter the hostname with up
to 255 alphanumeric
characters.
Enter the hostname
Remove the invalid characters
and retry.
Remove the multi-byte
characters and retry.
Select [Host Name], and then
retry the operation.
Select [IP Address], and then
retry the operation.
Specify other serial number
and register again.
Specify other IP address and
register again.
Specify other hostname and
register again.
After completing FDCOPY,
which was booted last time,
retry the operation.
If the same error occurs again
despite retrying, call HP
technical support.
Remote Web Console Error Codes
Severity Failure
Level Level
55