HP XP20000/XP24000 Manual page 394

Table 66 Error Codes — Part Code 8005 (continued)
Part Error
Code Number
8005 55265
8005 56301
8005 56302
8005 56303
8005 56524
8005 56525
8005 56526
8005 57101
8005 58572
8005 58573
394 Remote Web Console for Storage System Messages and Error Codes
Error Message
The parity group that contains
the volume(s) to which Cache
Residency Manager is set
cannot be migrated to
another CLPR.
Remove the Cache Residency
Manager settings from the
volumes, and then migrate
the parity group.
CLPR No:%s
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
This function cannot be used
by the storage partition
administrator.
Because the settings across
the multiple SLPRs are
contained, the authority has
been shifted to the storage
administrator from the
storage partition
administrator. To continue the
operation, contact the
storage administrator. To
perform other operations,
select a function button.
The resources of other SLPR(s)
cannot be accessed.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
This function is not supported.
Recommended Action
Check the settings, and then
retry the operation.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Select another window. To
set this function, contact the
storage administrator.
To continue the operation,
contact the storage
administrator and have the
settings across the multiple
SLPRs cancelled, and then
retry the operation.
To perform other operations,
select a function button.
Correct the settings, and then
retry the operation.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
The microcode versions of
DKCMAIN and SVP may not
match. Check whether the
DKCMAIN microcode version
and the SVP microcode
version match.
Severity Failure
Level Level
E 6
E 3
E 3
E 3
E 3
E 3
E 6
E 3
E 6
E 6