HP XP20000/XP24000 Manual page 189

Table 43 Error Codes — Part Code 5105 (continued)
Part Error Error Message
Code Number
5105 8916 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
5105 8918 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
5105 8919 The subsystem status is
invalid. Call HP technical
support.
5105 551 13 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
5105 551 14 There is no monitoring data.
It might be deleted by
another user's operation.
5105 55500 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
5105 55501 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
5105 56524 This function cannot be used
by the storage partition
administrator.
5105 56525 Because the settings across
the multiple SLPRs are
contained, the authority has
been shifted to the storage
administrator from the
storage partition
administrator. To continue the
operation, contact the
storage administrator. To
perform other operations,
select a function button.
5105 56526 The resources of other SLPR(s)
cannot be accessed.
5105 66016 A monitoring switch cannot
be enabled with the specified
gathering interval.
5105 66017 An error occurred during SVP
processing. If this problem
persists, please call HP
Technical support.
Recommended Action
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Retry the same operation
several times. If the same
error occurs, call HP technical
support.
If this problem persists, call
HP technical support.
Change the monitoring switch
to Enable for collecting data,
and then perform the
operation.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Select another window. To
set this function, contact the
storage administrator.
To continue the operation,
contact the storage
administrator and have the
settings across the multiple
SLPRs cancelled, and then
retry the operation.
To perform other operations,
select a function button.
Correct the settings, and then
retry the operation.
Change the gathering
interval, and retry the
operation.
If this problem persists, call
HP technical support.
Remote Web Console Error Codes 189
Severity Failure
Level Level
E 2
E 2
E 2
E 2
E 6
E 2
E 2
E 3
E 3
E 6
W 5
E 2