HP XP20000/XP24000 Manual page 322

Table 56 Error Codes — Part Code 6510 (continued)
Part Error
Code Number
6510 9024
6510 9025
6510 9026
6510 9100
6510 9101
6510 9102
6510 9104
6510 9105
6510 9106
6510 9107
6510 91 1 1
6510 91 12
322 Remote Web Console for Storage System Messages and Error Codes
Error Message
Are you sure you want to
exchange the specified ports?
Confirm the associated
channel paths are off-line.
Are you sure you want to
switch the ports? If the remote
copy paths exist on the ports,
delete them beforehand.
Are you sure you want to
switch the ports?
If any remote copy paths exist
on the ports, delete them
beforehand.
Also, to avoid the switching
operation from being
reported as a failure, confirm
first that a message
prompting you to change the
channel cable connections is
displayed, and then perform
the necessary changes.
Do you want to exit?
Do you want to cancel?
Do you want to apply?
Do you want to change the
mode?
The value that is under setup
is not reflected yet. Do you
want to exit?
The value that is under setup
is not reflected yet. Do you
want to change the mode?
The value that is under setup
is not reflected yet. Do you
want to continue the
operation?
Do you want to delete the
specified line of settings from
the Preview list?
Do you want to continue this
operation?
Recommended Action
Ensure that the associated
channel paths are offline.
Remove the remote copy
paths that are associated with
the ports.
To continue to change ports,
click [OK].
To close the window, click
[OK]. Otherwise, click
[Cancel].
To cancel the operation, click
[OK].
To apply settings in Preview
to the disk storage system,
click [OK].
To switch the mode, click
[OK]. Otherwise, click
[Cancel].
To discard the current settings
and exit the window, click
[OK]. Otherwise, click
[Cancel].
To discard the current settings
and switch to View mode,
click [OK]. Otherwise, click
[Cancel].
To discard the current settings
and refresh the window, click
[OK]. Otherwise, click
[Cancel].
To discard the current
settings, click [OK].
Otherwise, click [Cancel].
To continue the current
operation, click [OK].
Otherwise, click [Cancel].
Severity Failure
Level Level
W 5
W 5
W 5
i 0
i 0
i 0
i 0
i 0
i 0
i 0
W 0
i 0