HP XP20000/XP24000 Manual page 427

Table 80 Error Codes — Part Code 9007
Part Error Error Message
Code Number
9007 5099 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
9007 6012 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
9007 7070 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
9007 7071 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
Table 81 Error Codes — Part Code 9010
Part Error Error Message
Code Number
9010 7440 An error occurred during
processing. If this problem
persists, call HP technical
support.
9010 9303 There are no valid volumes.
9010 59341 In the environment where the
host is connected, the
performance of host I/O
might be decreased if the
alias volume is added to
more than one CU at a time.
Addition of the alias volume
for one CU is recommended.
Do you want to apply this
setting?
9010 65703 The maximum permissible
capacity of program product
became insufficient. Install
additional license key(s) to
expand the license capacity
of this software title.
9010 65818 The used capacity is being
calculated now. The licensed
capacity might be insufficient
by this operation.
Recommended Action
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Recommended Action
If the same problem persists
despite retrying, call HP
technical support.
Check the device emulation
type or the definition of the
journal volume.
If you want to apply the
setting, click [Yes]. If not,
click [No].
Install additional license keys
to expand the license
capacity of this software title.
Purchase the license when the
licensed capacity runs short.
Remote Web Console Error Codes 427
Severity Failure
Level Level
E 2
E 2
E 2
E 2
Severity Failure
Level Level
E 2
W 0
W 0
i 5
i 0