HP XP20000/XP24000 Manual page 166

Table 38 Error Codes — Part Code 3210
Part Error
Code Number
3210 55001
3210 55002
3210 55101
3210 55102
3210 55201
3210 55301
3210 55302
3210 55303
3210 55401
3210 55402
3210 55403
166 Remote Web Console for Storage System Messages and Error Codes
Error Message
The specified V-VOL group
cannot be deleted.
A V-VOL group cannot be
deleted when it contains the
following volumes:
A volume with path
definition.
A LUSE volume.
The maximum number of
V-VOL Groups is already
registered.
The setting of V-VOL group is
incorrect.
The V-VOL Group is
duplicated.
V-VOL cannot be configured
because the specified value
is invalid.
It cannot be configured when
one of the following errors
occur:
The setting capacity of the
V-VOL is outside the
range.
The number of created
V-VOLs is outside the
range.
The number of V-VOLs
exceeds the maximum
number of V-VOLs that can
be created in the whole
subsystem.
The specified capacity
exceeds the remaining
capacity.
There are V-VOLs whose
CU:LDEV numbers are not
set.
The selected CU:LDEV
number has already been
used.
The CU:LDEV number is
outside the valid range.
The SSID setting is incorrect.
There are boundaries that do
not have SSID.
The specified SSID is already
in use.
Recommended Action
Check the specified content,
and retry the operation.
Check the setting range, and
then retry the operation.
Check the settings, and retry
the operation.
Check the content of the
operation.
Check the specified content,
and retry the operation.
Check the settings, and retry
the operation.
Check the specified content,
and retry the operation.
Check the specified content,
and retry the operation.
Check the specified content,
and retry the operation.
Check the specified content,
and retry the operation.
Check the content of the
operation.
Severity Failure
Level Level
W 5
W 5
W 5
W 5
W 5
W 5
W 5
W 5
W 5
W 5
W 5