HP XP20000/XP24000 Manual page 440

Table 87 Error Codes — Part Code 9605 (continued)
Part Error
Code Number
9605 58432
9605 58433
9605 58434
9605 58435
9605 58436
9605 58437
9605 58438
9605 58442
9605 58443
9605 58444
9605 58445
9605 58447
440 Remote Web Console for Storage System Messages and Error Codes
Error Message
A VMA cannot be set up on
this logical volume because
Auto LUN is using the logical
volume.
An access attribute is set to
the specified extent.
This logical volume is busy.
This logical volume is busy.
The access attribute of the
logical volume has already
been changed.
VMA is set to the logical
volume.
This logical volume is
configured as a command
device.
The emulation type of the
logical volume is not
OPEN-V.
The logical volume is a
mainframe volume.
A VMA cannot be set up on
this logical volume because
XP Continuous Access,
Business Copy, or XP
Continuous Access Journal is
using the logical volume.
A VMA cannot be set up on
this logical volume because
Business Copy is using the
logical volume.
The command was rejected,
because you tried to set VMA
to a logical volume with a
path set on.
Recommended Action
Release XP Auto LUN's use of
the logical volume, or set up
the VMA on another logical
volume.
Release the access attribute
of the extent.
Retry a little later.
Retry a little later.
See the Data Retention Utility
window and check the
following about the logical
volume you have selected:
The access attribute must
be Read/Write
The logical volume must
be able to be specified as
an S-VOL
You must be able to set a
path to the logical volume
using the RAID Manager
or Remote Web Console
No mode is set using the
RAID Manager
Select a logical volume
without VMA.
Check the logical volume
configuration, and then retry
the operation.
Select a logical volume
whose emulation type is
OPEN-V.
Specify an open-system
volume.
Release the pair state or set
up the VMA on another
logical volume.
Release the XP Business Copy
pair, or set up the VMA on
another logical volume.
Select other logical volumes
without VMA, or delete the
path of the specified logical
volume, and then retry the
operation.
Severity Failure
Level Level
E 5
E 5
E 5
E 5
E 5
E 5
E 5
E 5
E 5
E 5
E 5
E 5