HP XP20000/XP24000 Manual page 245

Table 50 Error Codes — Part Code 6005 (continued)
Part Error Error Message
Code Number
6005 58452 A pair cannot be created
because the licensed capacity
of Data Retention Utility on
the RCU side is insufficient or
Data Retention Utility is not
installed on the RCU.
6005 58454 A pair cannot be created
because the licensed capacity
of Data Retention Utility on
the MCU side is insufficient
or Data Retention Utility is not
installed on the MCU.
6005 58460 The specified M-VOL is
already used as a primary
data volume for XP
Continuous Access Journal or
Universal Replicator for
Mainframe. To use the
M-VOL in conjunction with
one of these program
products, recreate the XP
Continuous Access Journal
pair or the Universal
Replicator for Mainframe pair
using a mirror ID other than
0, and retry the operation.
6005 58494 A pair cannot be created
because the specified M-VOL
is being used by XP
Snapshot.
6005 58495 A pair cannot be created
because the specified R-VOL
is being used by XP
Snapshot.
6005 58496 A pair cannot be created
because the specified M-VOL
is a virtual volume.
6005 58497 A pair cannot be created
because the specified R-VOL
is a virtual volume.
Recommended Action
Check the licensed capacity
of Data Retention Utility on
the RCU side, or confirm
whether Data Retention Utility
is installed on the RCU. To
execute this operation,
purchase a license key that
allows you to use a larger
capacity or install Data
Retention Utility on the RCU.
When an SLPR is allocated,
check the licensed capacity
of the SLPR.
Check the licensed capacity
of Data Retention Utility on
the MCU side or confirm
whether Data Retention Utility
is installed on the MCU. To
execute this operation,
purchase a license key that
allows you to use a larger
capacity or install Data
Retention Utility on the MCU.
When an SLPR is allocated,
check the licensed capacity
of the SLPR.
Use another volume, or
recreate the XP Continuous
Access Journal pair or the
Universal Replicator for
Mainframe pair using a
mirror ID other than 0. Then
retry the operation.
Specify another volume.
Specify another volume.
Specify another volume.
Specify another volume.
Remote Web Console Error Codes 245
Severity Failure
Level Level
i 5
E 6
i 5
i 5
i 5
i 5
i 5