HP XP20000/XP24000 Manual page 119

Table 27 Error Codes — Part Code 1010 (continued)
Part Error Error Message
Code Number
1010 9017 LUN security will be applied
to the specified command
device. Do you want to
continue?
1010 9019 The LUN will not be specified
as a command device. Also,
command device security will
be disabled on the LUN. Do
you want to continue?
1010 9103 Do you want to change?
1010 9150 Select the free LUN.
1010 9151 Only the LUN(LDEV) is
specified. Select the
corresponding LDEV(LUN).
1010 55208 The host mode External
Storage cannot be specified.
1010 55233 The host mode External
Storage cannot be specified.
1010 55234 This action will cause a
failover of resource groups
on the node which is going
to be shutdown if they are
running. Are you sure to
proceed?
1010 59049 The setting extends across
multiple SLPRs. Do you want
to continue?
1010 59050 The setting extends across
multiple SLPRs. Do you want
to continue?
1010 591 17 When a host mode option is
set, the value will be set to
default. Set the host mode
option when it is necessary.
1010 65775 Reboot OpenVMS when you
turn off the host mode option
No.33.
In addition, it cannot access
LU where UUID is allocated.
1010 65776 Allocate UUID to all of the
LUs, and reboot OpenVMS
when you turn on the host
mode option No.33.
In addition, it cannot access
LU where UUID is not
allocated.
Recommended Action
To continue processing, click
[OK]. Otherwise, click
[Cancel].
Check the settings.
Check the settings.
To continue processing, click
[OK]. To stop processing,
click [Cancel].
To continue processing, click
[OK]. To stop processing,
click [Cancel].
To continue processing, click
[OK]. To stop processing,
click [Cancel].
Set the host mode option
when it is necessary.
Reboot OpenVMS when you
turn off host mode option
No.33.
In addition, it cannot access
LU where UUID is allocated.
Allocate UUID to all of the
LUs, and reboot OpenVMS
when you turn on host mode
option No.33.
In addition, it cannot access
LU where UUID is not
allocated.
Remote Web Console Error Codes
Severity Failure
Level Level
i 0
i 0
i 0
i 0
i 0
W 5
W 5
W 5
E 5
E 5
i 5
W 5
W 5
1 19