HP XP20000/XP24000 Manual page 359

Table 61 Error Codes — Part Code 7005 (continued)
Part Error Error Message
Code Number
7005 58001 The operation of the L2 pair
failed because the L1 pair
was in COPY(SP) status,
PSUS(SP) status or
COPY(RS-R) status.
7005 58002 The Quick Restore command
has been rejected because
the specified pair is
composed of a normal
volume and a customized
volume (CV).
7005 58003 The command has been
rejected because a XP
Continuous Access pair exists
in the same subsystem frame.
7005 58004 The command has been
rejected because the issued
request is an operation that
cannot be performed with a
volume that can be used from
either the mainframe or
open-system hosts.
7005 58259 The Quick Restore command
has been rejected, because
the specified pair contains
internal and external
volumes, and also is used as
a XP Continuous Access pair.
7005 58260 The command has been
rejected because the
specified P-VOL is used as
P-VOL of XP Continuous
Access pair or XP External
Storage Access Manager
pair.
7005 58261 The command has been
rejected, because the
specified P-VOL is used as an
S-VOL of XP Continuous
Access pair.
Recommended Action
Wait until the L1 pair status
changes to PSUS or PAIR,
and then retry the operation.
The quick restore operation
cannot be performed when
the pair is composed of a
normal volume and a
customized volume (CV).
Select a different pair.
To continue the operation,
delete the XP Continuous
Access pair.
The requested operation
cannot be performed. Check
the status of the specified
volume.
Delete the XP Continuous
Access pair or execute the
operation by other pairs.
The requested command
cannot be executed in the
current status of XP
Continuous Access pair or XP
External Storage Access
Manager pair. See the
section about sharing XP
Business Copy volumes in the
HP StorageWorks
XP24000/XP20000 Business
Copy Software User Guide
for the relation between the
state of XP Continuous Access
pair or XP External Storage
Access Manager pair and the
XP Business Copy operations.
The requested command
cannot be executed in the
current status of XP
Continuous Access pair. See
the Interoperability with Other
Products and Functions
section in the HP
StorageWorks
XP24000/XP20000 Business
Copy Software User's Guide
for the relationship between
the state of XP Continuous
Access pair and the XP
Business Copy operations.
Remote Web Console Error Codes 359
Severity Failure
Level Level
i 0
i 0
i 0
i 0
i 0
W 5
W 5