HP XP20000/XP24000 Manual page 35

Table 3 Error Codes — Part Code 0003 (continued)
Part Error Error Message
Code Number
0003 2095 A maintenance operation is
in progress. For example:
LDEV formatting is in
progress
Correction Copy is in
progress
Drive Copy is in progress
The CHA/DKA status is
changing
The cache status is
changing
Replacement of an OEM
drive microcode is in
progress
LDEV shredding is in
progress
Extent shredding is in
progress
Therefore the specified
operation cannot be
executed.
0003 2096 Currently running microcode
version does not support the
specified operation.
0003 2097 The host specified by the
WWN is performing I/O
operations.
0003 2098 The operation cannot be
performed, because the SVP
microcode version does not
match the DKCMAIN
(subsystem) microcode
version.
0003 2099 The operation cannot be
performed, because an
inoperative MP exists.
0003 2100 An error occurred while
connecting to the storage
system. The configuration
may be inconsistent. Select
[All Refresh] and refresh the
configuration.
Recommended Action
Wait for a moment and retry.
An error occurred. If this
problem persists call HP
technical support.
Stop executing I/Os, and
then retry the operation.
Call HP technical support,
when the same problem
persists.
Wait a few seconds, and
then retry the operation. If the
same problem persists, call
HP technical support.
Click [All Refresh] and refresh
the configuration.
Remote Web Console Error Codes
Severity Failure
Level Level
E 6
E 2
E 6
E 6
E 6
E 2
35