HP XP20000/XP24000 Manual page 439

Table 87 Error Codes — Part Code 9605 (continued)
Part Error Error Message
Code Number
9605 58413 The attribute of the virtual
volume of the XP Snapshot
cannot be changed.
9605 58414 The attribute of the P-VOL or
the S-VOL of the XP Snapshot
cannot be changed.
9605 58415 The VMA of the pool volume
cannot be changed.
9605 58417 The VMA of the P-VOL or the
S-VOL of the XP Snapshot
cannot be changed.
9605 58418 The access attribute cannot
be changed, because the
status of the specified XP
Continuous Access Journal
volume is in "PAIR" or in
"COPY".
9605 58419 The access attribute of a
primary or a secondary
volume for remote copy
cannot be changed when
VMA is set.
9605 58420 VMA cannot be set for the
specified logical volume,
because the specified logical
volume is a LUSE volume.
9605 58422 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
9605 58423 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
9605 58424 The specified logical volume
is blocked.
9605 58425 A VMA cannot be set up on
this logical volume because
the logical volume is being
used as a journal volume of
XP Continuous Access
Journal.
9605 58426 Extents are already set to the
specified logical volume.
9605 58427 VMA is not set to the
specified logical volume.
9605 58428 Extents are not set to the
specified logical volume.
9605 58429 A retention term is set to the
specified logical volume.
Recommended Action
Select another volume.
Select another volume.
Select another volume.
Select another volume.
Release or suspend the XP
Continuous Access Journal
volume.
Suspend the remote copy
pair or delete the pair, and
then retry the operation.
Release the LUSE volume, or
set VMA for a different
logical volume.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Restore the logical volume.
Release the journal volume of
XP Continuous Access
Journal, or set up the VMA
on another logical volume.
Set the extent to another
logical volume.
Set the VMA.
Set the extents.
Make the setting to another
logical volume.
Remote Web Console Error Codes 439
Severity Failure
Level Level
E 5
E 5
E 5
E 5
E 5
E 5
E 5
E 5
E 5
E 5
E 5
E 5
E 5
E 5
E 5