HP XP20000/XP24000 Manual page 14

Table 1 Error Codes — Part Code 0001 (continued)
Part Error
Code Number
0001 65734
0001 66100
0001 66559
0001 66802
Table 2 Error Codes — Part Code 0002
Part Error
Code Number
0002 1025
0002 2001
0002 2002
0002 2003
0002 2004
14 Remote Web Console for Storage System Messages and Error Codes
Error Message
P9000 or XP Command View
Advanced Edition version
information ID is invalid.
Check the setting, and then
retry the operation.
The Login could not be
performed because a function
failed to start during SVP
initialization.
Call HP technical support.
The operation failed because
the SVP OS does not support
IPv6.
No more P9000 or XP
Command View Advanced
Edition version information
can be registered, because
the number of registered
P9000 or XP Command View
Advanced Edition version
information reached the
maximum. Reduce the
number of P9000 or XP
Command View Advanced
Edition version information
and then retry the operation.
Error Message
The specified LU path does
not exist. Check the setting.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
The SVP is busy.
Wait for a while, and then
click [Refresh All] on the File
menu and refresh the
configuration.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
Recommended Action
P9000 or XP Command View
Advanced Edition version
information ID is invalid.
Check the setting, and then
retry the operation.
Call HP technical support.
Use the IPv4 FTP server. To
use the IPv6 FTP server,
contact HP technical support.
No more P9000 or XP
Command View Advanced
Edition version information
can be registered, because
the number of registered
P9000 or XP Command View
Advanced Edition version
information reached the
maximum. Reduce the
number of P9000 or XP
Command View Advanced
Edition version information
and then retry the operation.
Recommended Action
The configuration information
has already been changed.
Check the setting and make
the settings for the
configuration information
again.
If this problem persists, call
HP technical support.
If this problem persists call HP
technical support.
Click [Refresh All] on the File
menu and refresh the
configuration.
If this problem persists call HP
technical support.
Severity Failure
Level Level
E 2
E 3
W 5
E 2
Severity Failure
Level Level
E 6
E 2
E 2
W 2
E 2