HP XP20000/XP24000 Manual page 137

Table 34 Error Codes — Part Code 3005 (continued)
Part Error Error Message
Code Number
3005 2204 Devices to be maintained
include journal volumes.
Delete or suspend all pairs
belonging to journal volumes
to be maintained.
3005 2205 Devices to be maintained
include journal volumes.
Delete all pairs belonging to
journal volumes to be
maintained.
3005 251 1 The restore operation has
been failed, because the
specified LDEV was not
shredded or formatted.
3005 2512 The restore operation has
been failed, because the
system cannot access the
specified LDEV. Call HP
technical support.
3005 2515 One of the following is
defined: a XP Continuous
Access pair, a XP Continuous
Access Journal pair, or a
Universal Replicator for
Mainframe pair.
Alternatively, command
devices defined by Business
Continuity Manager are
included.
Please release the pair
definition or delete command
devices defined by Business
Continuity Manager, and
then retry the operation.
3005 2516 One of the following is
defined: a XP Continuous
Access pair, a XP Continuous
Access Journal pair, or a
Universal Replicator for
Mainframe pair. Please
delete the pair definition or
suspend the pair, and then
retry the operation.
3005 2517 One of the following is
defined: a Business Copy
pair, a ShadowImage for
Mainframe pair, or a
Compatible FlashCopy(R)
pair. Split the pair, and then
retry the operation. If the
Quick Split mode is on,
suspend the pair, and then
split.
Recommended Action
Devices to be maintained
include journal volumes.
Delete or suspend all pairs
belonging to journal volumes
to be maintained.
Devices to be maintained
include journal volumes.
Delete all pairs belonging to
journal volumes to be
maintained.
Shred or format the specified
LDEV. If the specified LDEV is
a Thin Provisioning volume
(TP-VOL), recover the pool
first.
Call HP technical support.
Release the pair definition or
delete command devices
defined by Business
Continuity Manager, and
then retry the operation.
Delete the pair definition or
suspend the pair, and then
retry the operation.
Split the pair, and then retry
the operation. If the Quick
Split mode is on, suspend,
and then split.
Remote Web Console Error Codes 137
Severity Failure
Level Level
E 6
E 6
i 6
E 2
E 6
E 6
E 6