HP XP20000/XP24000 Manual page 36

Table 3 Error Codes — Part Code 0003 (continued)
Part Error
Code Number
0003 2200
0003 2201
0003 2202
0003 2204
0003 2205
0003 2501
0003 2502
0003 2503
0003 2504
0003 2510
36 Remote Web Console for Storage System Messages and Error Codes
Error Message
The Concurrent Copy or
Compatible XRC operation is
in progress in the target
volumes. Cancel the
Concurrent Copy job or
delete a Compatible XRC
pair via the host.
Processing cannot be
performed because of Data
Retention settings.
The specified volume cannot
be processed due to the
effect of the access attribute
assigned by Volume
Retention for Mainframe.
Devices to be maintained
include journal volumes.
Delete or suspend all pairs to
which the journal volumes
belong.
Devices to be maintained
include journal volumes.
Delete all pairs to which the
journal volumes belong.
The volume cannot be
configured as a command
device because the volume
does not have Read/Write
attribute.
The LUs cannot be combined
or released because the
volumes don't have
Read/Write attribute.
The LUs cannot be combined
or released because the
volumes don't have
Read/Write attribute.
No settings can be made
because of a volume reserved
for RAID Manager.
No path can be set to the
specified volume because the
addition of volumes is not
finished.
Recommended Action
If the Concurrent Copy or the
Compatible XRC operation is
in progress in the target
volumes, cancel the
Concurrent Copy job or
delete a Compatible XRC
pair via the host. If the
Concurrent Copy or the
Compatible XRC operation is
not in progress in the target
volumes, issue the LISTSESS
and LISTDVCS commands,
check the SESSION ID No.,
and terminate SESSION by
means of the TERMSESS
command.
Correct settings, and then
retry.
Check the settings, and then
retry the operation.
Delete or suspend all pairs to
which the journal volumes
belong.
Delete all pairs to which the
journal volumes belong.
Correct settings, and then
retry.
Correct settings, and then
retry.
Correct settings, and then
retry.
Release the reserved attribute
of the target volume by using
Data Retention Utility.
Call HP technical support and
finish adding volumes.
Severity Failure
Level Level
E 6
E 6
E 6
E 6
E 6
E 6
E 6
E 6
W 5
E 6