HP XP20000/XP24000 Manual page 249

Table 50 Error Codes — Part Code 6005 (continued)
Part Error Error Message
Code Number
6005 68757 The Paircreate operation
failed because the specified
S-VOL, which is an XP Thin
Provisioning volume, is
already used by another
program product.
6005 68758 The Add Pair (Paircreate)
operation failed because the
specified R-VOL is a System
Disk.
6005 68764 The Add Pair (Paircreate)
operation failed because the
specified M-VOL is a System
Disk.
6005 68787 The operation failed because
the XP Continuous Access
function was not installed.
6005 68788 The operation failed because
the XP External Storage
Access Manager function
was not installed.
6005 68789 The Paircreate operation
failed because the XP
Continuous Access software
was not installed in the RCU.
6005 68790 The Paircreate operation
failed because the XP
External Storage Access
Manager function was not
installed in the RCU.
6005 68791 The operation failed because
the specified volume was not
an S-VOL.
6005 68792 The operation failed because
the specified volume was not
an XP External Storage
Access Manager pair
volume.
6005 68793 The Reverse Resync operation
failed because the status of
the specified volume was not
SSWS.
6005 68794 The operation failed because
the path from the RCU to the
MCU did not exist.
6005 68795 The operation failed. The
shared memory might be
insufficient.
Call HP technical support.
Recommended Action
Select another volume that is
not used by other program
products such as XP Business
Copy, XP Snapshot, and XP
Auto LUN, or cancel the use
of the volume operated by the
other program products and
retry the operation.
Check whether the specified
R-VOL is a System Disk.
Check whether the specified
M-VOL is a System Disk.
Install XP Continuous Access
to the storage system.
Install XP External Storage
Access Manager to the
storage system.
Install XP Continuous Access
to the RCU.
Install XP External Storage
Access Manager to the RCU.
Refresh the window, and
confirm whether the specified
volume is an S-VOL.
Refresh the window, and
confirm whether the specified
volume is an XP External
Storage Access Manager
pair volume.
Refresh the window, and
confirm whether the status of
the specified volume is
SSWS.
Create a path from the RCU
to the MCU.
Contact HP technical support,
and check the shared
memory.
Remote Web Console Error Codes 249
Severity Failure
Level Level
W 0
W 0
W 0
W 0
W 0
W 0
W 0
W 0
W 0
W 0
W 0
E 0