HP XP20000/XP24000 Manual page 101

Table 23 Error Codes — Part Code 0610 (continued)
Part Error Error Message
Code Number
0610 69027 A CLPR number cannot be
applied for [Set External
Volume Parameter] dialog
box or [Edit Policy] dialog
box is specified.
0610 69041 The specified configuration
information does not match
the current configuration. The
window will be refreshed and
displayed again.
Table 24 Error Codes — Part Code 0710
Part Error Error Message
Code Number
0710 5501 1 0 cannot be specified in all
the fields or the Class A field.
0710 55596 The value of the IP address
and the port number of the
primary syslog server are the
same as the ones of the
secondary syslog server.
0710 59319 Write down the IP address,
the port number, and the
location identification name
which you have set in the
Syslog window, because you
may need to set those items
in the Syslog window again.
0710 65683 0 cannot be specified in all
the fields.
Table 25 Error Codes — Part Code 0810
Part Error Error Message
Code Number
0810 65645 Enter up to 2,048
alphanumeric characters.
0810 65646 Enter alphanumeric
characters only.
Recommended Action
Specify the CLPR number that
can be applied for [Set
External Volume Parameter]
dialog box or [Edit Policy]
dialog box and retry the
operation.
An error occurred. Some
items are not reflected to the
configuration information.
Check the configuration
information after the window
is refreshed, and specify the
configuration information
again if there are items not
reflected.
Recommended Action
Reply to the message.
Set a different value for the
IP address and the port
number.
Click [OK].
Reply to the message.
Recommended Action
Enter up to 2,048
alphanumeric characters.
Enter alphanumeric
characters only.
Remote Web Console Error Codes 101
Severity Failure
Level Level
E 5
E 6
Severity Failure
Level Level
W 5
W 0
W 0
W 5
Severity Failure
Level Level
E 5
E 5