HP XP20000/XP24000 Manual page 303

Table 54 Error Codes — Part Code 6505 (continued)
Part Error Error Message
Code Number
6505 58704 The operation to change the
status to the status ready for
Delta resync failed because
the status of the volumes was
one of the following:
The P-VOL for XP
Continuous Access and
the primary data volume
for Universal Replicator
are different.
The M-VOL for TrueCopy
for Mainframe and the
primary data volume for
Universal Replicator for
Mainframe are different.
6505 58705 The Delta resync operation
failed. The specified
secondary data volume
should meet the following
requirements.
The specified volume is a
secondary data volume of
another mirror.
The pair status of the
specified volume is PSUS,
PSUE, Suspend, PAIR or
Duplex.
6505 58707 The Add Pair (Paircreate)
operation or the Resume Pair
(Pairresync) operation failed
because the status of the
specified secondary data
volume was Not Ready.
6505 58708 The Add Pair (Paircreate)
operation to get ready for
Delta resync failed, or the
recovery to the status ready
for Delta resync failed. If the
same problem persists despite
retrying, call HP technical
support.
6505 58716 The licensed capacity of XP
Continuous Access or
TrueCopy for Mainframe on
the RCU is insufficient.
Check the licensed capacity
of this program product and
the related program products.
The related program products
are:
XP Continuous Access or
TrueCopy for Mainframe
XP Continuous Access
Journal or Universal
Replicator for Mainframe
Recommended Action
Check the status of the data
volumes in the XP Continuous
Access, TrueCopy for
Mainframe, XP Continuous
Access Journal, or Universal
Replicator for Mainframe
window.
Check the status of the
specified secondary data
volume.
Check the status of the
specified secondary data
volume.
If the same problem persists
despite retrying, call HP
technical support.
Check the licensed capacity
of this program product and
the related program products.
See the user's guides of XP
Continuous Access or
TrueCopy for Mainframe for
details on the licensed
capacities.
The related program products
are:
XP Continuous Access or
TrueCopy for Mainframe
XP Continuous Access
Journal or Universal
Replicator for Mainframe
Remote Web Console Error Codes 303
Severity Failure
Level Level
W 0
W 0
W 0
W 0
W 5