HP XP20000/XP24000 Manual page 332

Table 58 Error Codes — Part Code 6610 (continued)
Part Error
Code Number
6610 7303
6610 7440
6610 8101
6610 9006
6610 9008
6610 9009
6610 9021
6610 9024
6610 9025
6610 9026
6610 9100
6610 9101
6610 9102
332 Remote Web Console for Storage System Messages and Error Codes
Error Message
An error occurred in client
logic.
An error occurred during
processing. If this problem
persists, call HP technical
support.
The system cannot apply the
new configuration. Do you
want to refresh?
Exchange the channel cable
connections after
confirmation of the port type.
SIMs of XP Continuous
Access Journal and Universal
Replicator for Mainframe are
cleared.
The export is complete.
The Port Setting process has
not completed. Do you want
to continue for other ports?
Are you sure you want to
exchange the specified ports?
Confirm the associated
channel paths are off-line.
Are you sure you want to
switch the ports? If the remote
copy paths exist on the ports,
delete them beforehand.
Are you sure you want to
switch the ports?
If any remote copy paths exist
on the ports, delete them
beforehand.
Also, to avoid the switching
operation from being
reported as a failure, confirm
first that a message
prompting you to change the
channel cable connections is
displayed, and then perform
the necessary changes.
Do you want to exit?
Do you want to cancel?
Do you want to apply?
Recommended Action
Call HP technical support.
If the error occurs after
retrying, call HP technical
support.
Click [Refresh], and retry.
Check the port type, and then
change cable connections.
Click [OK].
Click [OK].
To continue processing, click
[Yes]. If the processing
finishes, reconfigure the port
that is not in operation.
Ensure that the associated
channel paths are offline.
Remove remote copy paths
that are associated with the
ports.
To continue to change ports,
click [OK].
To close the window, click
[OK]. Otherwise, click
[Cancel].
To cancel the operation, click
[OK].
To apply settings in the
Preview list to the disk
storage system, click [OK].
Severity Failure
Level Level
E 2
E 2
W 5
W 5
W 0
i 0
W 5
W 5
W 5
W 5
i 0
i 0
i 0