HP XP20000/XP24000 Manual page 275

Table 54 Error Codes — Part Code 6505 (continued)
Part Error Error Message
Code Number
6505 8922 The primary subsystem does
not support remote copy via
serial interface.
6505 8924 Logical paths are defined to
the port on the remote
subsystem.
6505 8929 Invalid port type.
6505 8930 Logical paths are defined to
the port on the remote
subsystem.
6505 8931 Logical paths are defined to
the port on the remote
subsystem.
6505 8932 Failed to create the logical
path, because the
configuration definition of the
specified LDKC number did
not exist in the primary
storage system.
6505 8934 The Add Pair (Paircreate)
operation failed because the
specified secondary data
volume was a NAS system
volume.
6505 8936 The Paircreate (Add Pair)
operation failed. The
microprogram version of the
specified secondary
subsystem does not support
XP Continuous Access with
NAS volumes.
6505 8944 The specified secondary data
volume is unusable because
of the access attribute
changed by Data Retention
Utility.
6505 8947 The external volume that is
mapped to an internal
volume is connected to the
port.
6505 8948 The specified port is receiving
I/O requests.
6505 8949 An internal error occurred.
6505 8950 An internal error occurred.
Recommended Action
Check whether the primary
storage system supports
remote copy via serial
interface. Install the
microcode that supports
remote copy via serial
interface, or execute remote
copy via fibre interface.
Delete the logical paths on
the specified port, and retry
the operation.
Check the port type of the
specified port, and retry the
operation.
Delete the logical paths on
the specified port, and retry
the operation.
Delete the logical paths on
the specified port, and retry
the operation.
Check whether the specified
LDKC number is defined in
the configuration of the
primary storage system.
Check the configuration of
the specified secondary data
volume.
Check the microcode version
of the secondary storage
system.
Check the access attribute of
the specified secondary data
volume.
Cancel the definition of the
external volume, and retry the
operation.
Stop I/O operations, and
retry.
Check the SSB log, and then
call HP technical support.
Check the SSB log, and then
call HP technical support.
Remote Web Console Error Codes 275
Severity Failure
Level Level
E 4
E 4
W 4
E 4
E 4
W 0
W 0
W 0
i 4
i 4
i 4
E 4
E 4