HP XP20000/XP24000 Manual page 32

Table 3 Error Codes — Part Code 0003 (continued)
Part Error
Code Number
0003 2010
0003 201 1
0003 2012
0003 2013
0003 2014
0003 2015
0003 2016
0003 2017
0003 2022
0003 2032
0003 2033
32 Remote Web Console for Storage System Messages and Error Codes
Error Message
The LDEV is being used by
the host, or an error occurred
during SVP processing.
Recovery processing may
take about 1 minute. Wait for
a while.
The status of the storage
system requires maintenance
(for example, the subsystem
is blocked, the shared
memory is inconsistent, or
some other problem occurs).
Call HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
A service engineer is
accessing the subsystem in
Modify mode. Wait for a
while, and then retry the
operation.
Network error detected;
exclusive lock was released.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
Communication busy. Retry
later.
The SVP is not ready yet, or
an internal processing is
being executed. Wait for a
while, and then click [Refresh]
on the File menu. When an
error occurs during login,
wait for a while and login
again.
Recommended Action
Check if the host is
performing I/O operations
on the target path or volume.
Check the status of the disk
storage system (for example,
the storage system is blocked,
the shared memory is
inconsistent, or some other
problem occurs). If this
problem persists, call HP
technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
A communication error
occurs. If the error occurs
after retrying, call HP
technical support.
Wait a few seconds, and
then retry the operation.
Re-execute the request for
starting exclusive lock.
If this problem persists, call
HP technical support.
Retry later.
Wait a few seconds, and
then click [Refresh] on the File
menu. When an error occurs
during login, wait for a while
and login again.
Severity Failure
Level Level
E 6
W 6
E 2
E 2
E 2
E 6
E 3
E 2
E 2
E 3
E 3