HP XP20000/XP24000 Manual page 377

Table 64 Error Codes — Part Code 7105 (continued)
Part Error Error Message
Code Number
7105 8607 The command has been
rejected, because the
specified T-VOL is used as a
M-VOL of TrueCopy for
Mainframe pair.
7105 8608 The specified T-VOL is not
defined.
7105 8609 The specified volume is not
set as a reserved volume.
7105 8610 The T-VOL is a target volume
for Auto LUN.
7105 861 1 The specified volume is a
T-VOL.
7105 8612 The specified volume is not a
T-VOL.
7105 8613 The RAID level of the
specified T-VOL is not
supported.
7105 8614 The command has been
rejected, because the
specified T-VOL is used as a
M-VOL of TrueCopy for
Mainframe pair.
7105 8615 The command has been
rejected, because the
specified T-VOL is used as a
R-VOL of TrueCopy for
Mainframe pair.
7105 8618 The T-VOL is already defined
as an S-VOL.
7105 8619 The specified T-VOL is defined
as a source volume for XP
Auto LUN.
Recommended Action
The requested command
cannot be executed in the
current status of TrueCopy for
Mainframe pair. See the
Interoperability with Other
Products and Functions
section in the Hitachi
ShadowImage™ for
Mainframe User's Guide: HP
XP24000 Disk Array, HP
XP20000 Disk Array for the
relationship between the state
of TrueCopy for Mainframe
pair and the ShadowImage
for Mainframe operations.
Refresh the window, and
retry the operation.
Check the status of the
volume.
Release the XP Auto LUN
setting.
Check the status of the
volume.
Check the status of the
volume.
Specify a volume of the
supported RAID level.
The requested command
cannot be executed in the
current status of TrueCopy for
Mainframe pair. See the
Interoperability with Other
Products and Functions
section in the Hitachi
ShadowImage™ for
Mainframe User's Guide: HP
XP24000 Disk Array, HP
XP20000 Disk Array for the
relationship between the state
of TrueCopy for Mainframe
pair and the ShadowImage
for Mainframe operations.
The R-VOL of TrueCopy for
Mainframe pair cannot be
used as a T-VOL of
ShadowImage for
Mainframe. Specify another
volume.
Check the volume number.
Release the XP Auto LUN
setting.
Remote Web Console Error Codes 377
Severity Failure
Level Level
W 5
i 0
i 0
i 0
i 0
i 0
i 0
W 5
W 5
i 0
i 0