HP XP20000/XP24000 Manual page 438

Table 87 Error Codes — Part Code 9605 (continued)
Part Error
Code Number
9605 8150
9605 8151
9605 8152
9605 8153
9605 8154
9605 8155
9605 8156
9605 56525
9605 56526
9605 56528
9605 58404
9605 58412
438 Remote Web Console for Storage System Messages and Error Codes
Error Message
You tried to set a retention
term to a logical volume
whose access attribute is not
Read Only or Protect.
You cannot shorten the
retention term of the logical
volume. To shorten it, call HP
technical support.
You cannot set a retention
term to any mainframe
volumes.
The specified retention term
exceeds the maximum.
The retention term of the
logical volume has been
changed by RAID Manager.
You cannot change the
access attribute because a
retention term is set to the
specified logical volume.
You cannot change the
access attribute because the
expiration lock is set to
Enable.
Because the settings across
the multiple SLPRs are
contained, the authority has
been shifted to the storage
administrator from the
storage partition
administrator. To continue the
operation, contact the
storage administrator. To
perform other operations,
select a function button.
The resources of other SLPR(s)
cannot be accessed.
Storage partition
administrator cannot disable
the expiration lock, because
the expiration lock is set to
Enable by storage
administrator.
The specified operation
cannot be executed because
the LDEV shredding, the
extent shredding or the LDEV
format is being executed.
Retry the operation after the
process is completed.
The attribute of the pool
volume cannot be changed.
Recommended Action
Check the logical volume,
and then retry the operation.
You cannot shorten the
retention term of the logical
volume. To shorten it, call HP
technical support.
Specify an open-systems
volume.
Correct the retention term,
and then retry the operation.
Check the retention term of
the logical volume, and then
retry the operation.
To change the access
attribute of the logical volume
to Read/Write, call HP
technical support.
Set the expiration lock to
Disable, and then change the
access attribute.
To continue the operation,
contact the storage
administrator and have the
settings across the multiple
SLPRs cancelled, and then
retry the operation.
To perform other operations,
select a function button.
Correct the settings, and then
retry the operation.
Contact the storage
administrator, or call HP
technical support.
Retry the operation after the
process is completed.
Select another volume.
Severity Failure
Level Level
E 5
E 5
E 5
E 5
E 5
E 5
E 5
E 3
E 3
E 5
E 5
E 5