HP XP20000/XP24000 Manual page 372

Table 64 Error Codes — Part Code 7105 (continued)
Part Error
Code Number
7105 8528
7105 8529
7105 8530
7105 8531
7105 8532
7105 8533
7105 8535
7105 8536
7105 8537
7105 8538
7105 8539
7105 8540
7105 8541
372 Remote Web Console for Storage System Messages and Error Codes
Error Message
An internal logic error
occurred.
An internal logic error
occurred.
An internal logic error
occurred.
An internal logic error
occurred.
The command has been
rejected, because the S-VOL
or the T-VOL is being used by
the host.
The command has been
rejected, because the
emulation type of the
specified volume is not
supported or the specified
T-VOL is used as a data
volume of Universal
Replicator for Mainframe.
A processor failure was
detected.
A cache failure was detected.
The cache capacities do not
match.
An SM failure was detected.
There is insufficient shared
memory to create 4096
pairs.
There is sufficient shared
memory to create 4096
pairs, but initial subsystem
setup is required before
creating pairs.
There is sufficient shared
memory to create 4096
pairs, and the initial
subsystem setup is complete.
Recommended Action
Call HP technical support.
Call HP technical support.
Call HP technical support.
Call HP technical support.
Stop the usage by the host.
Specify a volume that uses
the supported emulation type.
When the T-VOL is used as a
data volume of Universal
Replicator for Mainframe, the
command cannot be
executed in the current status
of Universal Replicator for
Mainframe pair. See the
Interoperability with other
Products and Functions
section in the Hitachi
ShadowImage™ for
Mainframe User's Guide: HP
XP24000 Disk Array, HP
XP20000 Disk Array for the
relationship between the
status of Universal Replicator
for Mainframe pair and the
ShadowImage for Mainframe
operations.
Call HP technical support.
Call HP technical support.
Call HP technical support.
Call HP technical support.
There is insufficient shared
memory in DKC. Call HP
technical support.
Call HP technical support.
Close the message box.
Severity Failure
Level Level
E 0
E 0
E 0
E 0
i 0
W 5
E 0
E 0
E 0
E 0
E 0
E 0
i 0