HP XP20000/XP24000 Manual page 19

Table 3 Error Codes — Part Code 0003 (continued)
Part Error Error Message
Code Number
0003 101 1 An error occurred. If this
problem persists, call HP
technical support.
0003 1012 LU path is set to a volume
which links as an expanded
LU.
0003 1013 The emulation types of the
volumes combined into a
LUSE volume are not the
same.
0003 1015 LU path is set to the releasing
expanded LU. (You need to
release the expanded LU and
path at the same time.)
0003 1018 An error occurred. If this
problem persists, call HP
technical support.
0003 1020 An error occurred. If this
problem persists, call HP
technical support.
Recommended Action
The volume that links as an
expanded LU extends over
CU#. The error does not
occur normally because it is
guarded in the screen. In the
unlikely event that this error
occurs, contact HP technical
support.
The configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
The emulation type of a
volume that links as an
expanded LU is not the same.
The error does not occur
normally because it is
guarded in the screen. In the
unlikely event that this error
occurs, contact HP technical
support.
The configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
The specified port does not
exist. You have specified a
wrong port number. Or the
specified port type
(exclusively for mainframe)
cannot be processed in this
agent. The error does not
occur normally because it is
guarded in the screen. In the
unlikely event that this error
occurs, contact HP technical
support.
LUN is invalid. (The specified
value is not in the
specification.) The error does
not occur normally because
it is guarded in the screen. In
the unlikely event that this
error occurs, contact HP
technical support.
Remote Web Console Error Codes
Severity Failure
Level Level
E 2
E 6
E 2
E 6
E 2
E 2
19