HP XP20000/XP24000 Manual page 421

Table 76 Error Codes — Part Code 8510
Part Error Error Message
Code Number
8510 5030 The display information has
not been changed.
8510 7060 An error occurred in client
logic.
8510 7301 An error occurred in client
logic.
8510 7302 An error occurred in client
logic.
8510 7440 An error occurred. If this
problem persists, call HP
technical support.
8510 9101 Do you want to cancel?
8510 9102 Do you want to apply?
8510 55235 The CLPR name already
exists. The CLPR name will
return to the name that is
displayed before you have
changed.
8510 55236 The value set for the number
of Cache Residency Manager
areas is outside the valid
range. The value will return
to the one set before.
8510 55237 The SLPR name already
exists. The SLPR name will
return to the name that is
displayed before you have
changed.
8510 55238 Some of the selected ports
cannot migrate to the other
SLPR. Change the settings.
8510 55240 Some of the selected parity
groups cannot migrate to the
other SLPR. Change the
settings.
8510 55261 The concatenated parity
group cannot be set across
multiple CLPRs. Select another
parity group, and then retry
the operation.
8510 55262 The Parity Group cannot be
migrated to the CLPR that you
newly created. Apply the
tentative settings with no
parity groups to the CLPR that
you have created, and then
migrate the parity group.
Recommended Action
Specify what you want to
register, and retry the
operation.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If the same problem persists
despite retrying, call HP
technical support.
To cancel, click [OK].
Click [OK] to execute the
operation.
Change the CLPR name.
Change the settings.
Change the SLPR name.
Check the settings and retry
the operation.
Check the settings and retry
the operation.
Select another parity group,
and then retry the operation.
Apply the tentative settings
with no parity groups to the
CLPR that you have created,
and then migrate the parity
group.
Remote Web Console Error Codes 421
Severity Failure
Level Level
W 0
E 2
E 2
E 2
E 2
E 2
E 2
W 0
W 0
E 0
E 0
E 0
W 0
W 0