HP XP20000/XP24000 Manual page 98

Table 23 Error Codes — Part Code 0610 (continued)
Part Error
Code Number
0610 59034
0610 59037
0610 59038
0610 59055
0610 59056
0610 59057
0610 59058
0610 59060
98 Remote Web Console for Storage System Messages and Error Codes
Error Message
The processing of this
command takes some time to
complete. Do you still want
to execute the command?
After you execute the
command, click [Refresh] on
the File menu to check the
progress.
The number of paths
registered to a port has
reached the maximum.
Select [OK] to continue
processing, or select [Cancel]
to stop processing. When
you select [OK], the
processing continues without
counting the path data
registered after the maximum
is reached.
Do you want to execute the
Delete Volume operation
without writing the cached
data to the volume?
The licensed capacity for a
program product will become
insufficient because of a
configuration change.
Add licensed capacity from
the License Key window.
If you do not add licensed
capacity in 10 days, the
program product will be
unavailable.
Stop any application that is
using the command device
(for example, RAID
Manager).
Do you want to continue this
operation?
The licensed capacity was
exceeded because of
changing the configuration.
Correct the licensed capacity
on the License Key Partition
Definition window.
Do you want to specify an
SSID without restrictions on
SLPRs?
The entered numerical value
is outside the setting range.
Recommended Action
To continue processing, click
[OK]. To stop processing,
click [Cancel].
The number of paths
registered to a port has
reached the maximum.
To continue processing, click
[OK]. Otherwise, click
[Cancel]. If you click [OK],
processing continues without
counting the path data
registered after the maximum
is reached.
To not write the cached data
to the volume, click [OK]. To
cancel the operation, click
[Cancel].
The licensed capacity for a
program product will become
insufficient because of a
configuration change.
Add licensed capacity from
the License Key window.
If you do not add licensed
capacity in 10 days, the
program product will be
unavailable.
To continue processing, click
[OK]. Otherwise, click
[Cancel].
Correct the licensed capacity
with the License Key Partition
Definition window.
To continue processing, click
[OK]. Otherwise, click
[Cancel].
Check the setting range, and
enter a correct numerical
value.
Severity Failure
Level Level
W 0
W 0
W 0
E 5
W 0
W 5
i 0
i 0