HP XP20000/XP24000 Manual page 177

Table 39 Error Codes — Part Code 3305 (continued)
Part Error Error Message
Code Number
3305 6092 An error occurred during
SVP processing. If this
problem persists, call HP
technical support.
3305 55500 An error occurred during
SVP processing. If this
problem persists, call HP
technical support.
3305 56526 The resources of other
SLPR(s) cannot be accessed.
3305 65649 The open volume is set for
the LDKCs other than LDKC
0.
3305 65650 The specified volume is used
as a System Disk volume.
3305 65651 The number of volumes with
System Disk setting exceeds
the maximum number of
volumes defined as System
Disk volume.
3305 65661 There are no changes in the
current configuration and the
setting.
3305 65669 The XP Thin Provisioning
volume associated with a
pool is included in the items
to be maintained. Release
the association of the XP Thin
Provisioning volume and the
pool to be maintained.
3305 65670 The volumes registered in an
XP Thin Provisioning Pool
Group are included in the
items to be maintained.
Delete the XP Thin
Provisioning Pool Group that
includes the items to be
maintained.
3305 65671 The pool volumes associated
with the XP Thin Provisioning
volume is included in the
items to be maintained.
Release the association of
the pool volume and the XP
Thin Provisioning volume
included in the items to be
maintained.
3305 65691 Preparing for quick format.
Check the status and wait
until the status changes to a
status that maintenance is
possible.
Recommended Action
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Correct the settings, and then
retry the operation.
Check the setting.
Restore the blockage status
of the system disk. If the status
cannot be restored, call HP
technical support.
Check the setting.
Check the setting.
Release the association of the
XP Thin Provisioning volume
and the pool to be
maintained.
Delete the XP Thin
Provisioning Pool Group that
includes the items to be
maintained.
Release the association of the
pool volume and the XP Thin
Provisioning volume.
Check the status and wait
until the status changes to a
state that allows
maintenance.
Remote Web Console Error Codes 177
Severity Failure
Level Level
E 2
E 2
E 6
E 6
E 6
E 6
E 6
E 6
E 6
E 6
E 6