HP XP20000/XP24000 Manual page 148

Table 34 Error Codes — Part Code 3005 (continued)
Part Error
Code Number
3005 68797
3005 68798
148 Remote Web Console for Storage System Messages and Error Codes
Error Message
Restoration of the pool has
failed. Pool cannot be
restored when:
processing takes time,
because blocked parts
exist in the storage system.
the Pool-VOL is blocked.
Deletion of the pool has
failed. Pool cannot be
deleted when:
V-VOL management area
is not initialized.
V-VOL management area
is not installed.
XP Snapshot pair still
remains in the pool.
P-VOL still remains in the
pool.
the Pool-VOL in the pool
is blocked.
the processing to release
the association of XP Thin
Provisioning volume is
being executed
the process to convert the
allocation method of pool
is being executed.
Recommended Action
When the pool cannot be
restored, do the following:
Wait for a while, click
[Refresh] or [Refresh All]
on the File menu of the
Remote Web Console
window, and then check
the pool status in the Pool
window.
If this problem persists,
see the troubleshooting
section of the HP
StorageWorks
XP24000/XP20000 Thin
Provisioning Software
User Guide to solve this
problem.
When the pool cannot be
deleted, do the following:
Check the installation
status of the V-VOL
management area if the
V-VOL management area
is not initialized.
Check the installation
status of the V-VOL
management area if the
V-VOL management area
is not installed.
Delete the XP Snapshot
pair if the pair still
remains in the pool.
Delete the XP Snapshot
pair if the P-VOL still
remains in the pool.
Check the status of the
pool-VOL in the pool, and
restore the pool-VOL if it
is blocked.
Click Refresh or Refresh
All on the File menu of the
Remote Web Console
window, confirm that the
amount of usage in the
pool is zero in the Pool
window, and then retry
the operation.
If the process to convert
the allocation method of
the pool is being
executed, wait for a
while, and then retry the
operation.
Severity Failure
Level Level
E 6
E 6