HP XP20000/XP24000 Manual page 50

Table 9 Error Codes — Part Code 0105 (continued)
Part Error
Code Number
0105 6535
0105 6536
0105 8000
0105 8002
0105 8102
0105 8979
0105 56507
0105 56521
0105 58623
50 Remote Web Console for Storage System Messages and Error Codes
Error Message
You cannot make changes
because a logical path to the
volume still remains.
The target volume cannot be
changed due to its LUSE
configuration.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
This function is not supported.
The operation of the external
volume has been failed
because all the paths to the
external volume are blocked.
The licensed capacity for a
program product will become
insufficient because of a
configuration change.
Add licensed capacity from
the License Key window.
If you do not add licensed
capacity in 10 days, the
program product will be
unavailable.
The licensed capacity of
some program products will
be insufficient because of the
Add LU operation.
The specified operation
cannot be performed,
because the XP Snapshot pair
using the pool volumes to be
maintained is in PSUS status
or being restored.
Please resynchronize the pair
or release the pair definition,
and then retry the operation.
Recommended Action
Delete a logical path, and
then make configuration
changes.
Release the LUSE volume,
and then request
configuration changes again.
Retry the operation. If this
problem persists, call HP
technical support.
Retry the operation. If this
problem persists, call HP
technical support.
Check whether the
DKCMAIN microcode version
and the SVP microcode
version are mismatched.
Restore more than one path
to the external volume, and
then perform the operation of
the external volume.
The licensed capacity for a
program product will become
insufficient because of a
configuration change.
Add licensed capacity from
the License Key window.
If you do not add licensed
capacity in 10 days, the
program product will be
unavailable.
Increase the licensed
capacity for the program
products that do not have
sufficient licensed capacity,
and then retry the operation.
Resynchronize or release the
pair definition of the XP
Snapshot pair using the pool
volume to be maintained,
and then retry the operation.
Severity Failure
Level Level
E 6
E 6
E 3
E 3
E 3
E 6
E 6
E 6
E 6