HP XP20000/XP24000 Manual page 346

Table 61 Error Codes — Part Code 7005 (continued)
Part Error
Code Number
7005 6023
7005 6502
7005 6503
7005 7310
7005 8000
7005 8001
7005 8100
7005 8500
7005 8501
7005 8502
7005 8503
7005 8504
346 Remote Web Console for Storage System Messages and Error Codes
Error Message
The SVP is busy. Please wait
for a while, and then retry the
operation.
Processing in progress.
Please wait for a while, and
then retry the operation.
The target volume status is
being changed to SMPL.
This error code is not
registered.
A time-out error occurred.
A time-out error occurred.
A time-out error occurred.
Sufficient amount of shared
memory is not installed or the
program product is not
installed.
The command has been
rejected, because the
previous command is being
processed.
You cannot reserve the
volume, because a XP
Continuous Access pair exists
in the same subsystem frame.
You cannot create the new
pair, because a XP
Continuous Access pair exists
in the same subsystem frame.
The command was rejected.
Check the composition, the
status, or the volume status of
the pair.
Recommended Action
If the same problem persists
despite retrying, call HP
technical support.
Wait a few seconds, and
retry the operation.
Wait a few seconds, and
retry the operation.
If this problem persists, call
HP technical support.
Retry the operation. If you get
the same message again,
reboot the computer. If
necessary, Call HP technical
support.
Retry the operation. If you get
the same message again,
reboot the computer. If
necessary, Call HP technical
support.
Retry the operation. If you get
the same message again,
reboot the computer. If
necessary, Call HP technical
support.
Add shared memory or
confirm whether the
necessary program product
key is installed.
Wait a few seconds, and
retry the operation.
Delete the XP Continuous
Access pair.
Delete the XP Continuous
Access pair.
Confirm the composition, the
status, or the volume status of
the pair. (See the HP
StorageWorks
XP24000/XP20000 Business
Copy Software User's Guide
for the relationship between
the composition of the pair,
status of the pair, or the
volume status of the pair and
those operations.)
Severity Failure
Level Level
W 3
W 0
i 0
E 0
E 4
E 4
E 4
i 0
W 5
i 0
i 0
i 0