HP XP20000/XP24000 Manual page 144

Table 34 Error Codes — Part Code 3005 (continued)
Part Error
Code Number
3005 58570
3005 58571
3005 58572
3005 58573
3005 58574
3005 58575
3005 58576
3005 58623
3005 58626
3005 58706
144 Remote Web Console for Storage System Messages and Error Codes
Error Message
V-VOL management area is
being used.
Delete the XP Snapshot
pair(s), and then retry the
operation.
The specified operation
cannot be executed because
the Pool-VOL is not mounted.
An error occurred during the
communication with the
storage system. Wait awhile,
and retry the operation.
If the error occurred in the
operation of the pool,
initialize the V-VOL
management area, refresh
the configuration by clicking
[Refresh All] on the File menu,
and then retry the operation.
This function is not supported.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
A communication time-out
error occurred in the storage
system. Wait for a while, and
then retry the operation.
The specified operation
cannot be performed,
because the XP Snapshot pair
using the pool volumes to be
maintained is in PSUS status
or being restored. Please
resynchronize the pair or
release the pair definition,
and then retry the operation.
An XP Snapshot pair is
defined. Cancel the pair
definition, and then retry the
operation.
An error occurred during SVP
processing.
If this problem persists, call
HP technical support.
Recommended Action
Delete the XP Snapshot pairs,
and then retry the operation.
Check the pool-VOL setting.
Wait awhile, and retry the
operation. If the error
occurred in the operation of
the pool, initialize the V-VOL
management area, refresh
the configuration by clicking
[Refresh All] on the File menu,
and retry the operation.
Check whether the
DKCMAIN microcode version
and the SVP microcode
version are mismatched.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Resynchronize the pair or
release the pair definition,
and then retry the operation.
Cancel the pair definition,
and then retry the operation.
If this problem persists, call
HP technical support.
Severity Failure
Level Level
E 6
E 6
E 2
E 3
E 6
E 6
E 3
E 6
E 6
E 2