HP XP20000/XP24000 Manual page 281

Table 54 Error Codes — Part Code 6505 (continued)
Part Error Error Message
Code Number
6505 58096 The specified volume is a
reserve volume of a
mainframe host.
6505 58097 XP Continuous Access Journal
or Universal Replicator for
Mainframe is not installed in
the primary subsystem.
6505 58098 The cache or the shared
memory is in an abnormal
state.
6505 58099 The cache or the shared
memory is in an abnormal
state.
6505 58100 The serial number or the
controller ID of the remote
subsystem is incorrect.
6505 58101 The pair status is incorrect.
6505 58102 An internal error occurred.
6505 58103 The specified secondary data
volume is a reserve volume
of a mainframe host.
6505 58104 The specified secondary data
volume is already used by
Compatible XRC.
Recommended Action
Check the status of the
specified volume from the
mainframe host.
Install XP Continuous Access
Journal or Universal
Replicator for Mainframe in
the primary storage system,
and then retry the operation.
Call HP technical support.
Call HP technical support.
Check the serial number and
the controller ID of this remote
storage system and already
registered remote storage
systems, and then specify the
correct values.
If the specified values are
correct, check the cable
connection of the remote
storage system. If the problem
persists, call HP technical
support.
Refresh the window, and
check the pair status.
The pair status may be
different in the primary
storage and the secondary
storage system. Wait for a
while, and then retry the
operation. Contact the
support center when the pair
status of the pair does not
match between the primary
and the secondary storage
system. In the volume
attached to Fujitsu OS, the
pair cannot be created by
specifying System for Timer
Type. Specify Local for Timer
Type, and then retry the
operation.
Check the status of the
specified secondary data
volume from the mainframe
host.
Check the status of the
specified secondary data
volume from the mainframe
host.
Remote Web Console Error Codes 281
Severity Failure
Level Level
i 0
i 0
i 0
i 0
i 0
i 0
E 4
i 4
W 0