HP XP20000/XP24000 Manual page 398

Table 67 Error Codes — Part Code 8105 (continued)
Part Error
Code Number
8105 1024
8105 1025
8105 1028
8105 1029
8105 1050
8105 1059
8105 1061
8105 1063
398 Remote Web Console for Storage System Messages and Error Codes
Error Message
An error occurred. If this
problem persists, call HP
technical support.
The specified LU path does
not exist.
The number of volumes you
intend to combine into a
LUSE volume exceeds the
maximum.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
The following volumes cannot
be specified when you
change expanded LU
configurations:
Volumes reserved by Auto
LUN
LUN Manager function (LUN
security) settings are given to
the ports other than Fibre
ports.
Check the setting.
An error occurred. If this
problem persists, call HP
technical support.
The specified WWN is
already in use. Specify
another WWN.
Recommended Action
Fibre topology information is
invalid. (The specified value
is not in the specification.)
The error does not occur
normally because it is
guarded in the screen. In the
unlikely event that this error
occurs, contact HP technical
support.
The configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
The configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
If this problem persists, call
HP technical support.
The configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
You are trying to perform
LUN Security operation for
non-Fibre port. The error does
not occur normally because
it is guarded in the screen. In
the unlikely event that this
error occurs, contact HP
technical support.
You are trying to perform
LUN Security operation for a
port where LUN Security
function is invalid. The error
does not occur normally
because it is guarded in the
screen. In the unlikely event
that this error occurs, contact
HP technical support.
Correct the specified
contents, and request the
setting of the configuration
information again.
Severity Failure
Level Level
E 2
E 6
E 6
E 2
E 6
E 2
E 2
E 6