HP XP20000/XP24000 Manual page 128

Table 32 Error Codes — Part Code 2005
Part Error
Code Number
2005 1002
2005 1006
2005 1009
2005 1010
2005 1012
2005 1013
2005 1015
2005 1021
128 Remote Web Console for Storage System Messages and Error Codes
Error Message
The specified volume cannot
be set as a command device
or a component of a LUSE
volume, because it is being
used as the volume of XP
Continuous Access, Business
Copy, Auto LUN, or XP
Snapshot.
Please select another volume.
The specified LUSE volume
cannot be released, because
it is being used as the volume
of XP Continuous Access,
Business Copy, Auto LUN, or
XP Snapshot.
The emulation type of the
volumes is not for open
systems, or the volumes are
not mounted. Check the
setting.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
LU path is set to a volume
which links as an expanded
LU.
The emulation types of the
volumes combined into a
LUSE volume are not the
same.
LU path is set to the releasing
expanded LU. (You need to
release the expanded LU and
path at the same time.)
The specified volume does
not exist.
Recommended Action
Select another volume.
Call HP technical support.
The configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
If this problem persists, call
HP technical support.
The configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
The emulation type of a
volume that links as an
expanded LU is not the same.
The error does not occur
normally because it cannot
be modified in the window.
In the unlikely event that this
error occurs, contact HP
technical support.
The configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
Check the setting.
Severity Failure
Level Level
E 6
E 6
E 6
E 2
E 6
E 2
E 6
E 6