HP XP20000/XP24000 Manual page 120

Table 28 Error Codes — Part Code 1 1 10
Part Error
Code Number
1 1 10 1064
1 1 10 1065
1 1 10 1 1 10
1 1 10 5000
1 1 10 5001
1 1 10 5020
1 1 10 5021
1 1 10 5022
1 1 10 5040
1 1 10 5041
1 1 10 5042
1 1 10 5043
1 1 10 5044
120 Remote Web Console for Storage System Messages and Error Codes
Error Message
The specified host is already
in use.
The specified name is already
in use.
You cannot use the following
characters for the name:
\ / , : ; * " < > |
You cannot use spaces for the
first and the last characters in
the name.
The specified WWN is
invalid.
Specify the WWN with 16
characters, using any of the
following combinations:
Numerals (0-9),
Letters (A-F),
Hyphen (-), or
Space.
(You cannot specify 0 for all
the 16 characters.)
The name should be input
using specified letters (a-z
and A-Y) and digits (0-9).
The Group Name should be
from 1 to 8 characters.
The name should be from 1
to 8 characters.
Each area of the WWN
should be 8 characters.
The maximum number of Host
Groups is already registered.
The maximum number of
hosts is already registered.
The number of LUNs in use
has already reached the
maximum number of LUNs
that can be specified in a
port (2,048 in a Fibre
Channel environment).
The maximum number of
WWN groups is 127.
The maximum number of LUN
groups is 128.
Recommended Action
Correct the specified
contents, and request the
setting of the configuration
information again.
Correct the specified
contents, and request the
setting of the configuration
information again.
Remove the prohibited
characters from the
nickname.
Enter a correct value, and
retry.
Correct the specified content,
and retry.
Correct the specified content,
and retry.
Correct the specified content,
and retry.
Correct the specified content,
and retry.
You cannot register a host
group.
Reduce the number, and
retry.
Reduce the number, and
retry.
Reduce the number, and
retry.
Reduce the number, and
retry.
Severity Failure
Level Level
W 5
W 5
W 5
W 5
W 5
W 5
W 5
W 5
W 5
W 5
W 5
W 5
W 5