Ipv6 Rip Status - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

ipv6 rip status

Enables or disables RIPng on the switch.
ipv6 rip status {enable | disable}
Syntax Definitions
N/A
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6250
Usage Guidelines
RIPng must be loaded on the switch
Examples
-> ipv6 rip status enable
Release History
Release 6.6.1; command was introduced.
Related Commands
ipv6 load rip
show ipv6 rip
MIB Objects
alaProtocolripng
alaRipngProtoStatus
page 30-66
default
disable
(ipv6 load rip) to enable RIP on the switch.
Loads RIPng into memory.
Displays RIPng status and general configuration parameters.
OmniSwitch 6250 CLI Reference Guide
IPv6 Commands
November 2009