Table of Contents
Advertisement
Agilent InfiniiVision 7000A Series Oscilloscopes
Programmer's Guide
5
Commands by Subsystem
Subsystem
"Common (*) Commands"
on page 113
"Root (:) Commands"
on page 139
":ACQuire Commands"
on page 181
":BUS<n> Commands"
on page 198
":CALibrate Commands"
on page 207
":CHANnel<n> Commands"
":DIGital<n> Commands"
on page 237
":DISPlay Commands"
on page 244
":EXTernal Trigger Commands"
":FUNCtion Commands"
on page 264
":HARDcopy Commands"
on page 281
":LISTer Commands"
on page 292
":MARKer Commands"
on page 295
Description
Commands defined by IEEE 488.2 standard that
are common to all instruments.
Control many of the basic functions of the
oscilloscope and reside at the root level of the
command tree.
Set the parameters for acquiring and storing
data.
Control all oscilloscope functions associated
with the digital channels bus display.
Utility commands for determining the state of
the calibration factor protection switch.
on page 217
Control all oscilloscope functions associated
with individual analog channels or groups of
channels.
Control all oscilloscope functions associated
with individual digital channels.
Control how waveforms, graticule, and text are
displayed and written on the screen.
on page 254
Control the input characteristics of the external
trigger input.
Control functions in the measurement/storage
module.
Set and query the selection of hardcopy device
and formatting options.
Turn on/off the Lister display for decoded serial
data and get the Lister data.
Set and query the settings of X-axis markers
(X1 and X2 cursors) and the Y-axis markers (Y1
and Y2 cursors).
111
Hide quick links:
Advertisement
Table of Contents
