Advertisement
6-44
DOORS
1. Rear Glass Run Channel Lower
Retainer Adjusting Stud and Nut
2. Inner Panel Cam Bolts
3. Remote Control Bolts
Fig. 6-59—Front Door Hardware - " A - 0 7 " Styles
4. Ventilator Division Channel
Lower Adjusting Stud and Nut
5. Ventilator to Inner Panel
Attaching Screw
6. Window Regulator Bolts
7. Window Lower Stop
Attaching Bolt
FRONT DOOR VENTILATOR CASTING-
"X-37" Styles
The front door ventilator casting is used on all
"37" Styles and is secured to the front door as-
sembly by one attaching bolt and one adjusting stud
and nut. The front facing of the ventilator frame is
secured to the ventilator casting by five attaching
screws.
Removal and Installation
1. Remove ventilator casting to door hinge pillar
panel attaching bolt and lower adjusting stud
nut.
2. Remove five ventilator casting to ventilator
frame attaching screws and remove assembly
from door.
3. A slight fore and aft adjustment of the ventila-
tor casting can be obtained at the lower ad-
justing stud and nut.
Advertisement
