Advertisement
6-12
DOORS
SIDE ROOF RAIL
WEATHERSTRIP
QUARTER WINDOW
RUN CHANNEL
2240
Fig. 6-19 —Side Roof Rail Weatherstrip & Retainer - " B & C - 4 7 " Styles
3. With weatherstrip removed, screws securing
weatherstrip retainer to side roof rail are
exposed. Remove screws to remove side roof
rail weatherstrip retainer (Fig. 6-18).
Removal-fChevrolet "B-47" Styles and
Cadillac "C-47" Styles)
1. At front of weatherstrip, disengage plastic
fasteners from front body hinge pillar (Fig.
6-19).
2. Remove screw inserted through weatherstrip
into side roof rail at rear of weatherstrip
where it joins quarter window run channel.
3. Starting at front body hinge pillar, carefully
pull weatherstrip out of retainer while simul-
taneously using a flat-bladed tool to break
cement bond between retainer and weatherstrip.
4. If retainer is to be removed, remove attaching
screws and pull retainer forward.
Removal—(Buick and Oldsmobile
"E-87" Styles)
1. Remove plastic fasteners at front of weather-
strip (See Fig. 6-20).
2. Remove rear quarter courtesy light lens. If
attaching screws securing rear section of side
roof rail weatherstrip are accessible, remove
screws. If not, proceed as follows:
a. Remove rear seat cushion, rear seat back
and rear quarter upper trim assembly (See
Trim Index).
b. Remove screw(s) securing side roof rail
weatherstrip (rear section) to side roof rail
(See Fig. 6-20), and rear quarter panel.
3. While carefully pulling weatherstrip out of re-
tainer, simultaneously break cement bond be-
tween weatherstrip
and
retainer using
a
flat-bladed tool.
4. With weatherstrip removed, screws securing
weatherstrip retainer to side roof rail are
Advertisement
