Advertisement
16-16
ELECTRICAL
FRONT DOOR W I N D O W CONTROL SWITCH BLOCK
REAR DOOR WINDOW CONTROL SWITCH BLOCK
REAR DOOR W I N D O W MOTOR
REAR DOOR W I N D O W HARNESS CONNECTOR
1474
Fig. 16-24 —Right Side Power Window Wiring - " A 35-55-65" and " 6 9 " Styles
To prevent the window from being operated to the
up position when the tail gate has been lowered, a
safety switch is located on the tail gate lock pillar.
The safety switch opens the ground circuit of the
tail gate window motor, making it inoperative. See
tail gate views.
On "A & B" Bodies - the tail gate window harness
runs adjacent to the body wire and consists of two
major sections. The front section of flat wire ex-
tends from the left center of the toe pan (Figs.
16-41, 16-42, and 16-43), rearward and connects to
the rear harness at the right rear quarter area
(see Figs. 16-44, 16-45, 16-46, 16-47 and 16-48).
The rear cross bar wiring is shown in Figures
16-49 and 16-50 and the tail gate wiring is shown
in Figures 16-51, 16-52 and 16-53.
On Chevrolet "X" Bodies - The tail gate window
harness is a component part of the body wiring
harness which consists of two sections (front and
rear) see Figures 16-54, 16-55, 16-56 and 16-57.
CHECKING PROCEDURE
Before performing an intensive checking procedure
to determine any failure of the circuit, check all
Advertisement
