Advertisement
14-16
DOOR, QUARTER AND SHELF TRIM
-QUARTER ARM REST SCREWS
FILLER PANEL SCREWS
QUARTER TRIM AND
RETAINING NAILS
WINDLACE AND
TACKING STRIP
ARM REST SCREWS
VIEW " A "
2304
Fig. 14-28 - R e a r Quarter Trim Assembly - " E " Body 39487 Style
8. On Buick and Oldsmobile styles, lift trim as-
sembly upward to disengage from retainer at
top of quarter inner panel and remove from
body. On Cadillac styles trim must also be
pulled forward. If trim assembly incorporates
an electrical switch, disconnect wire harness
from switch in trim assembly.
NOTE:
On Cadillac styles, the arm rest and
quarter trim is removed as an assembly. The
arm rest is an integral part of the quarter
trim and is not serviced separately.
9. To install rear quarter trim assembly or rear
quarter arm rest, reverse removal procedure.
NOTE:
Trim assembly nailing strip replace-
ment tabs are available as a service part.
REAR QUARTER T R I M -
" A " Body 8 0 Styles
Removal and Installation
1. Remove seat cushion and seat back assemblies.
2. Detach rear body lock pillar pinchweld finish-
ing strip (see section "B-B" in Fig. 14-31)
and remove front door sill plate.
Advertisement
