Advertisement
6-68
DOORS
Window Front Upper
Stop
Window Rear Upper
Stop (On Window)
Window Rear Upper
Stop (On Guide)
Fig. 6-92—Front Door Hardware - 26657 Style
Strip
Window Stabilizer
Assemblies
Window Lower Sash Channel
Cam Stud Nuts
Front Guide to Upper
Support Bracket Bolts
deflector. Remove outer strip assembly (win-
dow lower reveal molding) as described in
preceding "Front and Rear Door" section.
2. Loosen front up-stop bolt ( " 1 " , Fig. 6-92) and
remove stop from front guide.
7. Rear Guide Upper
9,
Attaching Bolts
8. Front Guide Upper
Attaching Bolts and
10.
Lower Attaching
Stud Nut
11,
Front and Rear Guide
Wedge Strap Adjusting
Studs
Inner Panel Cam Attaching
Bolts
Sector Gear Stop Bolt
4. Remove window stabilizer strip assembly bolts
("4", Fig. 6-92) and remove stabilizer strips.
5. Remove window lower sash channel cam to
glass attaching stud nuts ("5", Fig. 6-92).
3. Using a 1/4" hex-head wrench, remove rear
up-stop from window rear roller cam {"2",
Fig. 6-92).
NOTE:
For window adjustment, use up-stop
" 3 " on window rear guide. However, for
window removal, remove stop " 2 " on window.
6. Tilt top edge of glass inboard and disengage
window (with studs intact) from lower sash
channel cam.
7. Raise window and disengage front roller from
front guide, then rear roller from rear guide.
Advertisement
