Advertisement
DOOR, QUARTER AND SHELF TRIM
14-17
QUARTER TRIM
SCREWS
SHELF SIDE
FINISHING PANEL
QUARTER TRIM
SCREW
WINDLACE AND
TACKING STRIP
ARM REST
SCREWS (BUICK)
VIEW " A "
QUARTER TRIM AND
RETAINING NAILS
VIEW " B
2303
Fig. 14-29-Rear Quarter Arm Rest and Trim Assembly
- " E " Body
3. Remove screws securing rear quarter trim to
body panel and remove assembly from body
(see Fig. 14-31).
4. To install, reverse removal procedure.
REAR QUARTER LOWER T R I M -
All "A, B & C" Body " 6 9 and 3 9 " Styles
Removal and Installation
1. Remove rear seat back and cushion assemblies.
2. Remove rear roof rail garnish moldings or
rear body lock pillar pinchweld finishing lace.
3. Remove upper quarter trim finishing panel.
4. On "B & C" body styles, proceed as follows:
a. With tool J-6335 or other suitable flat-
bladed tool, pry trim assembly retaining
nails from tacking strip (Fig. 14-32).
retainer at top of rear quarter inner panel
and remove trim assembly.
5. On "A" body styles, with putty knife or other
suitable flat-bladed tool, detach trim assembly
at cemented areas indicated in Fig. 14-33 and
remove trim assembly.
6. On all styles, to install, reverse removal
procedure.
REAR QUARTER COVER T R I M -
AM " Z " Body 39 Styles
Removal and Installation
1. Remove rear seat back and cushion assembly.
2. Remove rear door sill plate.
3. Remove rear body lock pillar pinchweld finish-
ing lace.
b. Lift assembly upward to disengage from
4. Remove screw at rear of quarter lower trim.
Advertisement
