Advertisement
6-74
DOORS
see "Front Door Window Assembly - "11 and
67" Styles - Adjustments".
FRONT DOOR WINDOW FRONT GUIDE
CHANNEL-AM "E" Body Styles
Removal and InstaJlation
1. Raise door window. Remove trim pad and de-
tach inner panel water deflector.
2. Remove front door window assembly.
3. Remove center and lower adjusting stud nuts
and upper two attaching bolts and remove
guide assembly (see Fig. 6-93).
4. To install, reverse removal procedure.
^ — R U N CHANNEL
SECTION A-A
VIEW A
VIEW B
CHANNEL
1426
Fig. 6-100 — Front Door Glass Run Channel
Assembly - " X " Closed Styles
FRONT DOOR WINDOW REAR GUIDE
CHANNEL-AM "E" Body Styles
Adjustments
SEE DOOR WINDOW ADJUSTMENTS
REAR RUN CHANNE
LOWER NUT
Fig. 6-99-Door Lock Pillar - " X - 3 7 " Styles
Removal and Installation
1. Raise door window.
Remove trim pad and
detach inner panel water deflector.
2. Remove front door window assembly.
3. Remove center and lower adjusting stud nuts
and upper two attaching bolts and remove
guide assembly (see Fig. 6-98).
4. To install, reverse removal procedure.
Adjustments
SEE DOOR WINDOW ADJUSTMENTS
FRONT DOOR WINDOW REAR GUIDE
ASSEMBLY-AM "F" Body Styles
The front door window lower sash channel is
equipped with a roller at the rear section. This
roller travels within the rear guide.
Removal and Installation
1. Raise door window, remove trim pad and
detach inner panel water deflector sufficiently
to expose rear guide to door inner panel
attaching bolts (see Fig. 6-84).
2. Remove rear guide plate to door inner panel
attaching bolts (see Fig. 6-84).
3. Slide guide assembly (with plates attached)
down and forward to disengage glass sash
Advertisement
